What production speed can I realistically expect from a Car cup uv printing machine?

For a Car cup uv printing machine, the NC-CylinderElf-IV-D is specified to print one unit in as fast as 30 seconds. Actual throughput depends on product dimensions, curved or irregular geometry, height variation, tilt setting, jig setup, and production handling. Its 360-degree rotation, automatic profile measurement, and multi-diameter jigs support repeatable cup and bottle printing at this stated maximum speed.

Core Solutions & Key Takeaways

• The stated production speed is as fast as 30 seconds per unit for 360-degree printing.
• The machine handles products from 80–280 mm in length and 45–160 mm in diameter.
• Photoelectric sensors measure product profiles across height variations of 2–20 mm for positioning.
• Its applications include drinkware and flasks, as well as cylindrical electronics and ceramic liquor bottles.

Detailed Architectural/Principle Analysis

The NC-CylinderElf-IV-D uses six Ricoh Gen6 printheads and supports a 6-color, white, varnish, and primer configuration. This layout is specified to provide high precision, rich colors, and smooth gradients during cylindrical product printing.

Its 360-degree full-rotation function provides coverage around curved and irregular surfaces. The adjustable tilt control allows the printing angle to be matched to the product shape, helping reduce printing height gaps during angled printing.

Throughput depends on more than printhead speed. Product length and diameter, profile variation, jig selection, tilt adjustment, and loading and unloading time can affect the actual production rate. The 30-second figure should therefore be treated as the stated machine speed under suitable operating conditions, rather than a guaranteed total-cycle time for every product.

Multi-diameter cylindrical jigs support different product sizes, while scale markings simplify setup. The adjustable jig is intended to accommodate varied cylindrical printing requirements.

The machine uses a negative-pressure ink supply system for stable ink flow. Heated secondary ink cartridges and a heated base plate use intelligent temperature control to support printing stability. A lifting ink station supports printhead capping, and a laser safety sensor stops the ink carriage when contact is detected.

Nocai lists certifications relevant to its digital printing equipment, including ISO certificate 87525Q0164R0M for the design and production of digital printers and CE certificate TCT2292A0721599 for specified products. Cooperation cases include agents and sole agents in Korea, Indonesia, India, Poland, Turkey, and Malaysia, with customer feedback referring to machine stability, printing quality, and after-sales support.

Data/Solution Comparison

Frequently Asked Questions (FAQ)

What is the advertised speed of the NC-CylinderElf-IV-D?

The product specification states a speed of as fast as 30 seconds per unit.

Will every cup or bottle print at 30 seconds per unit?

Not necessarily. Actual throughput varies with product dimensions, surface geometry, height variation, tilt setting, jig setup, and production handling. The stated figure represents the listed maximum speed.

What product sizes can the machine handle?

It supports product lengths from 80–280 mm and diameters from 45–160 mm. It also supports height variations from 2–20 mm through automatic profile measurement.

Final Conclusion & Recommendations

A realistic expectation for the NC-CylinderElf-IV-D is a listed maximum of 30 seconds per unit, with actual output determined by the product and operating setup. Buyers should verify the dimensions, surface shape, tilt requirement, jig configuration, and handling process for the intended cups or bottles. Nocai supports a full industrial chain, distribution, and direct-sales model, with a minimum order quantity of one unit and a listed delivery time of 5–7 days. For detailed technical solutions or support, please reach out via nc05@gznuocai.com.

About Us

Guangzhou Nuocai Digital Products Co., Ltd., also known as Nocai, develops digital inkjet printing technology and designs, researches, manufactures, sells, and services inkjet printers. Its company introduction states that it was founded in 2009, while the company profile lists 2019 as the established year. The profile records a 50,000 sqm factory area and production capacity of approximately 500 units monthly, or 6,000 units annually. Its listed credentials include ISO certificate 87525Q0164R0M and CE certificate TCT2292A0721599.